DH811 110V DryFan 8 Litre Desiccant Dehumidifier

110V supply 50 Hz that can be run off a 12V DC-110V AC converters or 220V to 110V transformers, auto power reset in case of power supply interruption. “3-hole” technology commercial desiccant dehumidifier; water removal 8 liters maximum extraction. Operating range from -20°C up 40°C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (90 m3/hr – Process / 14m3/hr – exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 49dB Process air in 125mm – Process air out 125mm – Exhaust air 40mm.

£457.50 Including VAT £457.50

Description

NO WATER PRODUCED. MOISTURE IS VENTED AWAY EVEN UPWARDS

Ideal for Flood Drying, Building Maintenance & Storage

8 Litre Desiccant Dehumidifier 120V / 50Hz

Equivalent to a Compressor Dehumidifier of 16 Litre @ 18°C

Free Standing or Installed

Industrial dehumidifier DH811 steel construction with tough epoxy paint finish.

Very small for its 8 litre capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F. Perfect for any climate.

Steel Inside & Out
Tough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.

Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively.

3 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct.

Ecor Pro’s research shows that the DH811 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Perhaps the smallest 8 Litre dehumidifier in the market.

Dust Filter – The desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.

On Four Feet – Anti scratch plastic feet that are design Patented.Swivel out to provide anchor points for the dehumidifier.

Carrying Handle – Easy to carry by one person. The handle can be removed if the product is being installed and replaced by a top lid without handle.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The has one internal fan. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.

“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.

Note that the DH12XX dehumidifiers have a process air outlet flange.The DH8XX models do not.This allows dry air to be ducted into a space.

Power Supply – 110V supply 50Hz.
Auto Reset – If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
All Metal Construction – All metal with epoxy paint finish heat treated for strength inside & outside. Designed for longevity.
5m / 15′ Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.
Additional information
Weight 4.8 kg
Dimensions 19 × 19 × 19 mm
(L x W x H)-(weight)

7.87" x 7.87" x 7.87" – 10.58 lbs

Technology

Desiccant

Max Extract

8L-16.9pt

Power / Plug / Cord length

350W, 110V, 50Hz, 2.9A / Yes BS/EU

Barcode

UK EAN 5060224951255, EU EAN 5060224951293

Colour / Material

White / Mild Steel Epoy Paint

Duct Sizes

40mm (1.5")-125mm (5")

Swimming Pool Ready

No

Humidistat Inside / Humidistat Option

Yes / Yes

Carrying Handle / Water Container / Power Cord Length

Yes / No / 3

Fan Speeds / Sound

1 / 49dB

Operting Temperature

Minus 20?C to plus 40?C

Power Out Restart / Works From DC-AC Coverter

Yes / Yes

Airflow m3/hr

90 process / 14 exhaust

Power Out Restart

Yes

Works From DC-AC Coverter

Yes

Water Tank

No

Material

Mild steel expoxy coated

Approval

CE

You recently viewed...