NO WATER PRODUCED. MOISTURE IS VENTED AWAY EVEN UPWARDS
Ideal for Flood Drying, Building Maintenance & Storage
8 Litre Desiccant Dehumidifier 220V / 50Hz
Equivalent to a Compressor Dehumidifier of 16 Litre @ 18°C
Free Standing or Installed
Industrial dehumidifier DH800 steel construction with tough epoxy paint finish.
Very small for its 8 litre capacity. Will dry 247, temperature range -20°C/-4°F to +40°C/104°F. Perfect for any climate.
Steel Inside and Out
Tough Enough Even for Hiring or Restoration
Can be carried by one person and transported easily with the carrying handles.
Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively.
3 Hole Dehumidifier
Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct.
Ecor Pro’s research shows that the DH800 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers
Highly Compact – Perhaps the smallest 8 Litre dehumidifier in the market.
Dust Filter – The desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.
Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.
On Four Feet – Anti scratch plastic feet that are design Patented. Swivel out to provide anchor points for the dehumidifier.
Carrying Handle – Easy to carry by one person. The handle can be removed if the product is being installed and replaced by a top lid without handle.
Humidistat Connection – There is both and internal humidistat fitted and the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the humidistat EPHUM24DF. This will turn the dehumidifier ON and OFF automatically remotely if the dehumidifier is concealed or ducted in position.
Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.
Wet Air Exhaust – The unit has one internal fan. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.
“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.
Note that the DH1200 dehumidifiers have a process air outlet flange.The DH800 models do not.This allows dry air to be ducted into a space.