When purchased as seperate item the EPHUM-I-MAX comes with power adaptor and USB plug for powering the EPHUM-I-MAX externally to the unit. This means that temperature and humidity data can be retrieved from the sensor without the need for connection to any Ecor Pro appliance. (No control is given to any appliance unless it is connected directly. Only enviromental data)
Complete Kit
When supplied as spare part
Additional Parts
Not supplied with appliance
Many sensors can be added to an enviroment simply to monitor conditions (up to 999). The independent sensors can be used to trigger other events or monitors in rooms or App scenes where a monitor can triger an even in another appliance having appliances working smartly together,
NOTE:
Total run time hours data is held inside the unit’s memory. All other data is stored through the App to the mobile device it is paired with. No large amount of data is buffered inside the unit. Data received while there is a wifi connection.
EPHUM-I-DRY – LOW VOLTAGE Used with EPXXX RESTO & EPXXX MAX models, Low voltage humidistat with 1.0m / 3″ cable. Comes fitted with RJ11 plug for inserting directly into the unit unique to Ecor Pro. Connects in 4 seconds after unit recognises humidistat device.
EPHUM110E – HIGH VOLTAGE Used with EPD200 / DH3500, EPD150 / DH2500 / DH2511 / DH3511, High voltage humidistat with 1.5m / 4″ cable. Comes fitted with mil standard plug that screws directly into the dehumidifiers in seconds.
Simple humidity probe can be added to ducting and in remote areas also 1.5m / 4′ long. Plugs into EPHUM110E via a 2.5mm jack plug all provided.
EPHUM24DF – LOW VOLTAGE Used with EPD50 / DH1200, EPD30 / DH800, Low voltage humidistat with 2m / 6″ cable. Also comes fitted with a 2.5mm two pole jack plug fitted directly into the dehumidifier.
