DH800 DryFan 8 Litre Desiccant Dehumidifier

NO WATER PRODUCED. MOISTURE IS VENTED AWAY. EVEN UPWARDS.

Ideal for Flood Drying, Building Maintenance & Storage.

8 Litre Desiccant Dehumidifier 220V / 50Hz.

Equivalent to a Compressor Dehumidifier of 16 Litre @ 18°C.

Free Standing or Installed.

Industrial dehumidifier DH800 steel construction with tough epoxy paint finish.

Very small for its 8 litre capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Steel Inside & Out.
Tough Enough Even for Hiring or Restoration.

Can be carried by one person. Transported easily with removable carrying handles.

Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier.

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct

Parts Associated

Features Explained

Highly Compact – Small 8 Litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shakened clean or easily replaced. Prevents dust particles entering the unit and impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.

On Four Feet – Anti scratch plastic feet that are design . Patented.Swivel out to provide anchor points for the dehumidifier.

Carrying Handle – Easy to carry by one person. Removable handle for product installation. Replaced by a top lid without handle.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. Remotely turns the dehumidifier on an off automatically when dehumidifier is concealed or ducted in position.

Perfect for any climate.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The has one internal fan. Works in colder temperatures via vented away moisture. Moisture purged from the system by 15% of the process air. Dries with small negative pressure.

“Three Hole System” – One inlet and two outlets.

Note that the DH1200 dehumidifiers have a process air outlet flange. The DH800 models do not. Thus, dry air ducts into a space.