Probably The Most Popular Swimming Pool Dehumidifier in Europe
Built with a wide variety of uses. Designed for floor standing against a wall. Unlike most dehumidifiers this unit is coated internally to protect itself from the corrosive effects of chlorinated water if used in swimming pool areas Relatively slim of mostly metal construction often used for controlling humidity in public areas.
Mild Steel Inside & Out with tough Epoxy Paint Coated with Quiet Blower
Ideal for many applications including for Swimming Pools, Changing Rooms, Spas, Hair Dressers, Retail Outlets, Offices & Warehouses,
Perfect for keeping public areas often maintained around 26°C & with humidity problems comfortable for persons. Keep the office, hotel, museum or storage environment healthy with regulated humidity.
65 liter Rotary Compressor Dehumidifier
Rotary Compressor Dehumidifier for quiet operation with mild steel construction and plastic grills. Airflow front to top. Remove back panel to place drainage pipe to the left, right or bottom exit points.
Ecor Pro’s Designed D850 for Economical Pool or Commercial Area Drying (+35°C to +7°C)
Designed in the UK as a unit fit for professional purpose. The D850 is built to the highest standard with a very solid construction.
Digital Humidistat & Two Fan Speeds. Recently Improved Design
Dehumidifier Easy Guide HERE
User manual HERE
Compact – Perhaps the smallest 65 Pool Dehumidifier in the market.
Dust Filter – The dehumidifier has two washable air filters that are easily accessed from the front. Handled with care they should not need replacing for the lifetime of the unit
Easy Repair – easy access to key parts from the rear cover. Also new version has easy gas recharge point to top gas levels over the lifetime of the unit.
On Four Feet – The dehumidifier is meant to be placed on the floor and secured to a wall to avoid tipping with the bracket provided.
It is important to have at least 600cm of gap between the top grill and ceiling about to avoid air recirculating back inside the dehumidifier an defrost cycle issues.
Digital Humidistat – Built in humidistat can regulate the humidity level automatically ranging from 40, 50, 60, 70% Humidity Levels (40% being the most dry / 70% being most humid) or continuous running mode.
Two Fan Speeds – Choose between high and low fan speeds from the same control panel
Power Supply – 220V supply 50Hz
Auto Reset – If there is an interruption to the power supply, the dehumidifier will go back to off position. This is a safety feature and may avoid damage to the key component the compressor.
Compressor Light – On the control panel the compressor light will indicate when the compressor is working. If the fan is running without the compressor on then the unit is in defrost cycle. The defrost cycle time depends on temperature and air humidity level. The on board micro processor determines optimum cycle time automatically.
2 Meter Power Cord – In the UK, If placed near to water supply the plug should be removed and hard wired to a fused slash proof power socket.