Duct Converter for DSR12 or DSR20

Duct conversion kit that adds to a DSR units in seconds to convert air-inlet to a circular 315mm / 12″. For DSR12 & DSR20. Made from mild steel with epoxy paint finish. Supplied with new air filter and circular flange for the air outlet side to be attached by pop-rivot.

£232.50 Including VAT £232.50

CONVERTS DSR12 & DSR20 FROM RECTANGULAR CONNECTIONS TO ROUND

Ideal for linking to spiral ducting

Installed in Minutes

Industrial dehumidifier DH800 steel construction with tough epoxy paint finish.

Very small for its 8 litre capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F. Perfect for any climate.

Mild Steel with Epoxy Paint Finish

The rear fitting flange is pre-drilled to marry easily against the DSR dehumidifiers. The inlet duct coupling fits into the exiting filter frame with its own filter housing.? Allowing air filtration while circular duct coupled.
Take care when coupling to ducting that this air filter is accessible. Alternatively, remove the air filter and use another filter on the inlets of the ducting added. The filter housing that comes with the DSR dehumidifier becomes redundant in use.
Both the filter coupling & rear flange can be fitted in less than 1 minute allowing fast installation. ? Note the rear outlet is 91mm off the DSR centre line.

Parts Associated

    Features Explained

    Outlet flange – Pre-drilled adaptor that comes with the kit to marry outlet to circular ducting.

    Dust Filter – The desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.

    Quick Inlet Connection – Sits inside the existing filter frame of the DSR unit.

    All Metal Construction – All metal with epoxy paint finish heat treated for strength inside & outside. Designed for longevity.
    Weight 4 kg
    Dimensions 65 × 35 × 40 mm
    (L x W x H)-(weight)

    25.6" x 13.8" x 15.8" – 8.8 lbs

    Technology

    Duct Converter

    Barcode

    EAN 5060224950500

    Colour

    White

    Material

    Mild steel expoxy coated

    Colour / Material

    White / Mild Steel Epoy Paint

    Duct Sizes

    315mm (12")

    Swimming Pool Ready

    Yes

    Humidistat Inside / Humidistat Option

    Not Applicable

    Carrying Handle / Water Container / Power Cord Length

    Not Applicable / Not Applicable

    Fan Speeds / Sound

    Not Applicable / Not Applicable

    Operting Temperature

    Minus 20?C to plus 40?C

    Power Out Restart / Works From DC-AC Coverter

    Not Applicable / Yes

    Airflow

    Not Applicable

    You recently viewed...