DryBoat® 12 Stainless Steel Boat Dehumidifier 12L (DH1200 INOX)
£583.29 Including VAT £583.29
DryBoat® 12 Desiccant
Salt water resistant
Used for Boats & Yachts & Many other uses
- Recommended by Practical Boat Owner for Safey
- 12 Litres per day Water Extraction
- High pressure Turbo Fan
- Uses “3-hole” technology – see our Blogs
- Dimensions (L x W x H mm) 280 x 190 x 190
- Quiet only 44dB
- Compact all metal construction
- Ideal for applications where drying is needed continuously
- Can be used to dry even at -20°C (40°C maximum)
- Foam pre filter
- Carrying handle
- Four feet that double as anchor points should you wish to fix the DryBoat® 12 in place
- On / Off controls
- Air filter with easy access for cleaning
- Built in humidistat that can be user set
- Remote humidistat option that is plugged by low voltage jack plug
- Duct air-in option
- Exhaust duct made for easy permanent installation by plumber or a Home DIY person
- 220V supply that can be run off 12VDC-220VAC converters (110V option)
- Resets after power out
- All metal tough construction inside & out
- Long power cord of 5m
- Easy access to key parts for fast repair
- IP 24 Rated
- Standby Power only 2W
- Operational Power 500W
- Fan air volume 130m³/h
- Only weighs 6.6kg
- Can be used with use remote low voltage humidistat – OPTIONAL
- Wet air-out ducted with 45mm diameter ducting & jubilee clip (note 40mm common push fit waster wter pipe can also be used) – OPTIONAL
- Damp air-in can be ducted with 125mm diameter ducting & jubilee clip – OPTIONAL
Boat Dehumidifier with Worldwide Patent Pending
Purpose built boat dehumidifier. Unlike domestic dehumidifiers, these models are truly designed to run 247. Very small and will extract water even down to -20°C. Perfect for any climate. Salt resistant where others corrode.
Stainless Steel Inside & Out
Perfect As A Boat Dehmidifier Includes Turbo Fan
Ideal for many applications for boats, yachts or any shipping but also where cleanliness is important and the DrBoat will need to be cleaned regularly with harsh chemicals or salt solution. Applications even for the food industry or food storing.
Protect from the harmful effects of excess moisture on boats, yachts etc. on electronics, furnishing & the very fabric of the hull itself. This can literally rot the boat from the inside out. Stops the bad smells associated with damp making the cabin more pleasant to inhabit.
Perfect for drying out sails after a days sailing, drying clothes, ropes & equipment from the affects of salt spray. Drying or just maintaining cabin humidity level which prolongs the lifetime of items.
To see the advantanges of DryBoat HERE
Dimensions of DryBoat HERE
12 litre, Desiccant Dehumidifier
Desiccant boat dehumidifier of compact size with a stainless steel casing & carrying handle on four feet that double as securing fastenings. These allow the DryBoat® 12 to be secured securely into a cupboard, under seats or used in a removable location to be able to take it home at the end of sailing. In the home it has many applications too.
Can be carried by one person and transported easily with the carrying handle.
No water container to empty. Instead the water is expelled via a 41mm air duct to the outside (standard waste pipe diametre).
Ecor Pro’s Unique DryBoat® 12 Low Temperature (+40 to -20°C) Desiccant Dehumidifier
Designed in the UK as a unit fit for professional purpose. The DryBoat® 12 is an Ecor Pro "3-hole" system desiccant dehumidifier (it built to the highest standard with a very solid construction. Input process air is dust filtered and dried. Input air can be ducted in with a 125mm duct (5" inches). Wet exhaust air can be ducted out via a 41mm duct (standard waste pipe diameter).
The Ecor Pro DryBoat® 12 desiccant dehumidifier is a great choice for even drying around the home. The turbo fan allow a longer duct length of ducts up to 6 metres without greatly affecting performance.
Whisper Quiet Fan - Very very quiet fan makes this model ideal for small spaces where humans will be.
Highly Compact - Perhaps the smallest 12 Litre dehumidifier in the market.
Dust Filter - The DryBoat® 12 desiccant dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.
Easy Repair - Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the DryBoat® 12 dehumidifier.
On Four Feet - Anti scratch plastic feet can cleverly be swivelled out to make four anchor points so that the DryBoat® 12 can be fastened with suitable screws or bolts (not provided) to walls or simply fastened down onto a surface.
Carrying Handle - Flat handle that can be extended to allow easy carrying in one hand
Humidistat - Built in humidistat can
Remote Humidistat Option - A simple low voltage humidistat from the Ecor Pro range can be added to the DH1200 by way of a simple plug in low voltage jack plug.
Duct Air-In Option - The DryBoat® 12 is fitted with a metal duct flange on the filter grill to allow for an external 125mm duct to draw in the air from a more remote point. Concentrate the most damp air into the unit to be dried if needed.
An additional flange can be added to the Air Out but is not provided with the unit.
Exhaust Duct - Made for easy permanent installation by plumber or Home DIY person using standard waste pipe 41mm diameter fittings.
Power Supply - 220V supply 50Hz that can be run off a 12VDC-220VAC converters (110V option)
Auto Reset - If there is an interruption to the power supply, the DryBoat® 12 will continue to operate as soon as the power has been returned. Perfect in locations where the there is a "dirty" power supply that can affect other electronically controlled products.
All Metal Construction - Metal construction inside & outside. Designed for longevity.
Tough Construction - The design is inherently strong and can cope with moving the unit on a frequent basis if needed. Far stranger than a typical domestic dehumidifier.
Long 5 Metre Power Cord - no need to join cables when placed for instance in crawl spaces or lofts in the home for example.
Easy Access to Key Parts - If there is a fault with the unit its easy for the professional to repair. fast access to the internal parts that can be maintained or replaced very easily.
IP 24 - Can even operate in more damp conditions.
Ecor Pro’s research shows that the DryBoat® 12 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers
Using the Ecor Pro DryBoat® 12 Desiccant Dehumidifier
In drying applications the exhaust duct can be extended without loss of performance up to 1.0 metres. At 1.5 metres performance will reduce by typically 30% and at 3.0 metres it will reduce by 70%. No damage will be caused to an Ecor Pro’s DryBoat® 12 when the hose is extended. The Ecor Pro DryBoat 12 is self regulating.
You may also need:
£24.99 Including VAT £24.99
£83.33 Including VAT £83.33
£116.66 Including VAT £116.66
£29.16 Including VAT £29.16
£24.99 Including VAT £24.99
You may also like…
DryBoat®, Industrial Dehumidifiers
£1,083.29Including VAT £874.96
DryBoat®, Industrial Dehumidifiers
£1,583.33Including VAT £999.99