Yachting World Best Boat Dehumidifiers | Ecor Pro Direct https://buildingdryer.co.uk/product-category/boat-dehumidifiers/ Official Online Shop of Ecor Pro Dehumidifiers Tue, 07 Jul 2026 11:37:16 +0000 en-GB hourly 1 https://wordpress.org/?v=7.1.3 https://buildingdryer.co.uk/wp-content/uploads/2015/05/ecor-favicon-2-100x100.png Yachting World Best Boat Dehumidifiers | Ecor Pro Direct https://buildingdryer.co.uk/product-category/boat-dehumidifiers/ 32 32 DH1211 INOX 110V DryFan 12 Litre Stainless Steel Desiccant Dehumidifier https://buildingdryer.co.uk/product/dh1211-inox-110v-dryfan-12-litre-stainless-steel-desiccant-dehumidifier/ Wed, 14 Aug 2019 11:49:33 +0000 https://buildingdryer.co.uk/shop-buy-direct/import-placeholder-for-dh1211inox/ Unlike regular household dehumidifiers, the DH12XX 110V steel desiccant dehumidifier is purposely built for boats and other vessels propelled on fresh water by oars, sails or an engine using 110V. Small, compact and sturdy units are designed to run 24/7 that will extract moisture even down to -4°F (-20°C) room temperature - ideal for many boats, yachts and shipping or where cleanliness is important. The efficient performance of DH12XX not only helps protect the boats from the harmful effect of excessive moisture, it also prevents the electronics, furnishing and the very fabric of the hull from rotting inside and outside. Continuous use of the unit stops the bad smells associated with high humidity making the cabin more pleasant to inhabit. Salt-resistant housing is perfect for coastal and ocean environment condition.

The post DH1211 INOX 110V DryFan 12 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]>

NO WATER PRODUCED.MOISTURE IS VENTED AWAY EVEN UPWARDS

Ideal for Flood Drying, Building Maintenance & Storage

12 litre Stainless Steel Desiccant Dehumidifier 110V / 50Hz

Equivalent to a 25 Litre Compressor Dehumidifier @18°C

Free Standing or Installed

Industrial dehumidifier DH1211 stainless steel construction .

Very small for its 12 litre capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Steel Inside & Out
Tough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.

Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct

Ecor Pro’s research shows that the DH1211 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Perhaps the smallest 12 Litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shakened clean or easily replaced. Prevents dust particles entering the unit. Thus, impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.

On Four Feet – Design patented anti scratch plastic feet that swivel out. Good anchor points for the dehumidifier.

Carrying Handle – Easy to carry by one person. Handle can be removed. For example, when the product is being installed and replaced by a top lid without the handle.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.

Perfect for any climate.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The has one internal fan. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.

“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.

Note that the DH12XX dehumidifiers have a process air outlet flange. The DH8XX models do not. Hence, dry air ducts into a space.

Power Supply – 110V supply 50Hz
Auto Reset – If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
All Metal Construction – All stainless steel metal inside & outside. Designed for longevity.
5m / 15′ Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

The post DH1211 INOX 110V DryFan 12 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]> DH811 110V DryFan 8 Litre Stainless Steel Desiccant Dehumidifier https://buildingdryer.co.uk/product/dh811-110v-dryfan-8-litre-stainless-steel-desiccant-dehumidifier/ Wed, 14 Aug 2019 11:48:07 +0000 https://buildingdryer.co.uk/shop-buy-direct/import-placeholder-for-dh811inox/ Unlike regular household dehumidifiers, the DH811 INOX 110V stainless steel desiccant dehumidifier is purposely built for boats and other vessels propelled on water by oars, sails or an engine using 110V. Small, compact and sturdy units are designed to run 24/7 that will extract moisture even down to -4°F (-20°C) room temperature - ideal for many boats, yachts and shipping or where cleanliness is important. The efficient performance of DH811 INOX not only helps protect the boats from the harmful effect of excessive moisture, it also prevents the electronics, furnishing and the very fabric of the hull from rotting inside and outside. Continuous use of the unit stops the bad smells associated with high humidity making the cabin more pleasant to inhabit. Salt-resistant housing is perfect for coastal and ocean environment condition.

The post DH811 110V DryFan 8 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]>

NO WATER PRODUCED.MOISTURE IS VENTED AWAY EVEN UPWARDS

Ideal for Flood Drying, Building Maintenance & Storage

8 litre Stainless Steel Desiccant Dehumidifier 110V / 50Hz

Equivalent to a 16 Litre Compressor Dehumidifier @18°C

Free Standing or Installed

Industrial dehumidifier DH811 stainless steel construction .

Very small for its 8 litre capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & Out
Tough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.

Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct

Ecor Pro’s research shows that the DH811 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Small 8 litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shacked clean or easily replaced. Prevent dust particles entering the unit. Thus, impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.

On Four Feet – Design patented anti-scratch plastic feet. Anchor points for the dehumidifier.

Carrying Handle – Easy to carry by one person. Top lid without handle also available for installation.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.

Perfect for any climate.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The has one internal fan. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.

“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.

Note that the DH12XX dehumidifiers have a process air outlet flange. The DH8XX models do not. Thus, dry air ducts into a space.

Power Supply – 110V supply 50Hz
Auto Reset – If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
All Metal Construction – All stainless steel metal inside & outside. Designed for longevity.
5m / 15′ Power Cord – No need to join cables when placed for instance in crawl spaces or lofts in the home, for example.

The post DH811 110V DryFan 8 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]> DH800 INOX DryFan 8 Litre Stainless Steel Desiccant Dehumidifier https://buildingdryer.co.uk/product/dh800-inox-dryfan-8-litre-stainless-steel-desiccant-dehumidifier/ Wed, 14 Aug 2019 10:03:18 +0000 https://buildingdryer.co.uk/shop-buy-direct/import-placeholder-for-2360/ Stainless steel. 220V supply 50 Hz that can be run off a 12V DC-220V AC converters or 110V to 220V transformers, auto power reset in case of power supply interruption. "3-hole" technology commercial desiccant dehumidifier; water removal 8 litres maximum extraction. Operating range from -20°C up 40°C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (90 m3/hr - Process / 14m3/hr - exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 49dB Process air in 125mm - Process air out 125mm - Exhaust air 40mm

The post DH800 INOX DryFan 8 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]>

NO WATER PRODUCED.MOISTURE IS VENTED AWAY. EVEN UPWARDS.

Ideal for Flood Drying, Building Maintenance & Storage

8 litre Stainless Steel Desiccant Dehumidifier 220V / 50Hz

Equivalent to a 16 Litre Compressor Dehumidifier @18°C

Free Standing or Installed

Industrial dehumidifier DH800 stainless steel construction .Very small for its 8 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & OutTough Enough Even for Hiring or Restoration

Can be carried by one person.Transported easily with the removable carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively.

3 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct.

Furthermore, Ecor Pro’s research shows that the DH800 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers.

Parts Associated

Features Explained

Highly Compact – Small 8 Litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shakened clean or easily replaced. Prevent dust particles entering the unit and impeding performance.
Easy Repair – Maintenance and eventual repair have been thought through with an. Easy to remove cover. Quickly gives easy access to replace cord sets or warn parts via a qualified persons. Prolongs the lifetime of the dehumidifier.
On Four Feet – Design patented anti scratch plastic feet. Swivel out to provide. Anchor points for the dehumidifier.
Carrying Handle – Removable handle. Easy to carry by one person. Replaced by a top lid without handle, if needed.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.

Perfect for any climate.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The has one internal fan. The moisture is vented away allowing it to work in colder temperatures. Moisture purged from the system by 15% of the process air. Dries with small negative pressure.
“Three Hole System” – One inlet and two outlets.Note that the DH12XX dehumidifiers have a process air outlet flange. The DH8XX models do not. Thus, dry air can be ducted into a space.
Power Supply – Thus, 220V supply 50Hz
Auto Reset – If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
All Metal Construction – All stainless steel metal inside & outside. Designed for longevity.
5m / 15′ Power Cord – No need to join cables when placed for instance in crawl spaces or lofts in the home for example.

The post DH800 INOX DryFan 8 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]> DH1211 110V DryFan 12 Litre Desiccant Dehumidifier https://buildingdryer.co.uk/product/dh1211-110v-dryfan-12-litre-desiccant-dehumidifier/ Wed, 14 Aug 2019 10:03:16 +0000 https://buildingdryer.co.uk/shop-buy-direct/import-placeholder-for-dh1211/ 110V supply 50 Hz that can be run off a 12V DC-110V AC converters or 220V to 110V transformers, auto power reset in case of power supply interruption. "3-hole" technology commercial desiccant dehumidifier; water removal 12 litres maximum extraction. Operating range from -20?C up 40?C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (124 m3/hr - Process / 20m3/hr - exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 52dB Process air in 125mm - Process air out 125mm - Exhaust air 40mm

The post DH1211 110V DryFan 12 Litre Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]>

NO WATER PRODUCED.MOISTURE IS VENTED AWAY EVEN UPWARDS

Ideal for Flood Drying, Building Maintenance & Storage

12 litre Desiccant Dehumidifier 110V / 50Hz

Performs as Well as a 25 Litre Compressor @18°C

Free Standing or Installed

Industrial dehumidifier DH1211 steel construction with tough epoxy paint finish.

Very small for its 12 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Steel Inside & Out
Tough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.

Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct

Ecor Pro’s research shows that the DH1211 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Small 12 Litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shakened clean or easily replaced. Prevents dust particles entering the unit and impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.

On Four Feet – Design patented anti-scratch plastic feet. Swivel out to provide anchor points for the dehumidifier.

Carrying Handle – Easy to carry by one person. The handle can be removed if the product is being installed and replaced by a top lid without handle.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.

Perfect for any climate.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The has one internal fan. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.

“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.

Note that the DH12XX dehumidifiers have a process air outlet flange. The DH8XX models do not. This allows dry air to be ducted into a space.

Power Supply – 110V supply 50Hz
Auto Reset – If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
All Metal Construction – All metal with epoxy paint finish heat treated for strength inside & outside. Designed for longevity.
5m / 15′ Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

The post DH1211 110V DryFan 12 Litre Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]> DH811 110V DryFan 8 Litre Desiccant Dehumidifier https://buildingdryer.co.uk/product/dh811-110v-dryfan-8-litre-desiccant-dehumidifier/ Wed, 14 Aug 2019 10:03:14 +0000 https://buildingdryer.co.uk/shop-buy-direct/import-placeholder-for-dh811/ 110V supply 50 Hz that can be run off a 12V DC-110V AC converters or 220V to 110V transformers, auto power reset in case of power supply interruption. "3-hole" technology commercial desiccant dehumidifier; water removal 8 liters maximum extraction. Operating range from -20°C up 40°C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (90 m3/hr - Process / 14m3/hr - exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 49dB Process air in 125mm - Process air out 125mm - Exhaust air 40mm

The post DH811 110V DryFan 8 Litre Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]>

NO WATER PRODUCED.MOISTURE IS VENTED AWAY EVEN UPWARDS

Ideal for Flood Drying, Building Maintenance & Storage

8 litre Desiccant Dehumidifier 110V / 50Hz

Performs as Well as a 16 Litre Compressor @18°C

Free Standing or Installed

Industrial dehumidifier DH1211 steel construction with tough epoxy paint finish.

Very small for its 12 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Steel Inside & Out
Tough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.

Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct

Ecor Pro’s research shows that the DH811 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Perhaps the smallest 8 Litre dehumidifier in the market.

Dust Filter – The desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.

On Four Feet – Anti scratch plastic feet that are design . Patented.Swivel out to provide anchor points for the dehumidifier.

Carrying Handle – Easy to carry by one person. The handle can be removed if the product is being installed and replaced by a top lid without handle.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.

Perfect for any climate.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The has one internal fan. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.

“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.

Note that the DH12xx dehumidifiers have a process air outlet flange. The DH8xx models do not. This allows dry air to be ducted into a space.

Power Supply – 110V supply 50Hz
 
Auto Reset – If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
 
All Metal Construction – All metal with epoxy paint finish heat treated for strength inside & outside. Designed for longevity.
 
5m / 15′ Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

The post DH811 110V DryFan 8 Litre Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]> DH3500 INOX DryFan 45 Litre Stainless Steel Desiccant Dehumidifier https://buildingdryer.co.uk/product/dh3500-inox-dryfan-45-litre-stainless-steel-desiccant-dehumidifier/ Wed, 14 Aug 2019 10:03:12 +0000 https://buildingdryer.co.uk/shop-buy-direct/import-placeholder-for-dh3500inox/ 110V supply 50 Hz that can be run off a 12V DC-110V AC converters or 220V to 110V transformers, auto power reset in case of power supply interruption. "4-hole" technology commercial 316 stainless steel desiccant dehumidifier; water removal 45 liters maximum extraction. Operating range from -20?C up 40?C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (380 m3/hr - exhaust / 75m3/hr - regen air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 58dB Process air in 125mm - Process air out 125mm - Exhaust air 80mm - Regen air 80mm

The post DH3500 INOX DryFan 45 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]>

NO WATER PRODUCED. MOISTURE IS VENTED AWAY. EVEN UPWARDS.

Ideal for Flood Restoration, Sea vessels & Catering Applications

45 Litre Desiccant Dehumidifier 220V / 50Hz

Equivalent to a 90 Litre Compressor Dehumidifier @18°C

Free Standing or Installed

Industrial dehumidifier DH3500 INOX stainless steel construction with tough epoxy paint finish.Very small for its 45 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & OutTough Enough Even for Hiring or Restoration

Can be carried by one person. Transported easily with the carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

4 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 80mm / 3″ duct. Regen air can also be ducted into the dehumidifier with a 80mm / 3″ duct.

Ecor Pro’s research shows that the DH3500 INOX will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Small 45 litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shakened clean or easily replaced. Prevents dust particles entering the unit and impeding performance.

Easy Repair – Easy to remove cover for maintenance and eventual repair. Quickly gives easy access to replace cord sets or warn parts via qualified person. Prolongs the lifetime of the DH3500 dehumidifier. Cord sets can be replaced in around 20 minutes

On Four Feet – Anti scratch plastic feet.

Carrying Handle – Easy to carry by one person. The removable handles also protect the dehumidifier duct flanges if in transit.

Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit.To add this use the remote humidistat EPHUM220. This will turn the dehumidifier on an off automatically.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Perfect for any climate.

Wet Air Exhaust – The DH25XX has one internal fan compared to two in the DH35XX. Both do not produce water. Works in colder temperatures via vented away moisture. Dried with small negative pressure. Moisture is purged from the system by 15% of the process air.

“Four Hole System” – Two inlets and two outlets.

Regen Filter Housing – The Regen filter housing is a recent addition to the DH35XX model. It can be detached if not required. Used for certain applications.

Power Supply – Thus, 220V supply 50Hz

Auto Reset – If there is an interruption to the power supply, the DH35XX will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.

All Metal Construction – All metal stainless steel inside & outside. Designed for longevity.

4m / 12′ Power Cord – No need to join cables when placed for instance in crawl spaces or lofts in the home for example.

The post DH3500 INOX DryFan 45 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]> DH2500 INOX DryFan 35 Litre Stainless Steel Desiccant Dehumidifier https://buildingdryer.co.uk/product/dh2500-inox-dryfan-35-litre-stainless-steel-desiccant-dehumidifier/ Wed, 14 Aug 2019 10:03:10 +0000 https://buildingdryer.co.uk/shop-buy-direct/import-placeholder-for-dh2500inox/ Stainless steel. 220V supply 50 Hz that can be run off a 12V DC-220V AC converters or 110V to 220V transformers, auto power reset in case of power supply interruption. "3-hole" technology commercial desiccant dehumidifier; water removal 35 litres maximum extraction. Operating range from -20°C up 40°C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (380 m3/hr - Process / 75m3/hr - exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 56dB Process air in 125mm - Process air out 125mm - Exhaust air 80mm

The post DH2500 INOX DryFan 35 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]>

NO WATER PRODUCED. MOISTURE IS VENTED AWAY. EVEN UPWARDS.

Used For Restoration, Sea Vessels & Catering Industries.

35 Litre Desiccant Dehumidifier 220V / 50Hz.

Equivalent to a 70 Litre Compressor Dehumidifier @18°C.

Free Standing or Installed.

Industrial dehumidifier DH2500 INOX stainless steel construction.Very small for its 35 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & Out.Tough Enough Even for Hiring or Restoration.

Carried by one person and transported easily with the carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier.

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 80mm / 3″ duct

Ecor Pro’s research shows that the DH2500 INOX will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Small 35 litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.
Easy Repair – Easy to remove cover for maintenance and eventual repair. Easy access to replace cord sets or warn parts via qualified persons. Prolonging the lifetime of the DH2500 INOX dehumidifier. Cord sets can be replaced in around 20 minutesOn Four Feet – Anti scratch plastic feet.
Carrying Handle – Easy to carry by one person. The removable handles also protect the dehumidifier duct flanges if in transit.
Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit.To add this use the remote humidistat EPHUM220.This will turn the dehumidifier on an off automatically.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Perfect for any climate.

Wet Air Exhaust – The DH2500 INOX has one internal fan compared to two in the DH3500 INOX. Both do not produce water. Work in colder temperatures via vented away moisture. Moisture purged from the system by 15% of the process air. Dried with small negative pressure.

“Three Hole System” – One inlet and two outlets. Used as a four hole industrial dehumidifier via slight duct configuration and accurate duct flow measurement.  DH3500 INOX an easier alternative if concerned.
Power Supply – 220V supply 50Hz industrial dehumidifier.
Auto Reset – If there is an interruption to the power supply, the DH2500 INOX will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
All Metal Construction – All metal with epoxy paint finish heat treated for strength inside & outside. Designed for longevity.
5m / 15′ Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

The post DH2500 INOX DryFan 35 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]> DH1200 INOX DryFan 12 Litre Stainless Steel Desiccant Dehumidifier https://buildingdryer.co.uk/product/dh1200-inox-dryfan-12-litre-stainless-steel-desiccant-dehumidifier/ Wed, 14 Aug 2019 10:03:08 +0000 https://buildingdryer.co.uk/shop-buy-direct/import-placeholder-for-dh1200inox/ Stainless steel. 220V supply 50 Hz that can be run off a 12V DC-220V AC converters or 110V to 220V transformers, auto power reset in case of power supply interruption. "3-hole" technology commercial desiccant dehumidifier; water removal 12 liters maximum extraction. Operating range from -20°C up 40°C maximum room temperature for continuous drying applications, with 124 m3/hr air volume capacity (124 m3/hr - Process / 20m3/hr - exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 52dB Process air in 125mm - Process air out 125mm - Exhaust air 40mm

The post DH1200 INOX DryFan 12 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]>

NO WATER PRODUCED. MOISTURE IS VENTED AWAY EVEN UPWARDS

Ideal for Flood Drying, Building Maintenance & Storage

12 litre Stainless Steel Desiccant Dehumidifier 220V / 50Hz

Equivalent to a 25 Litre Compressor Dehumidifier @18°C

Free Standing or Installed

Industrial dehumidifier DH1200 stainless steel construction

Very small for its 12 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & Out
Tough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.

Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct

Ecor Pro’s research shows that the DH1200 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Small 12 Litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shakened clean or easily replaced. Prevents dust particles entering the unit and impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.

On Four Feet – Design patented anti scratch plastic feet. Provide anchor points for the dehumidifier.

Carrying Handle – Easy to carry by one person.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. Remotely turns dehumidifier on an off automatically when the dehumidifier is concealed or ducted in position.

Perfect for any climate.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The has one internal fan. Works in colder temperatures via The vented away moisture. Moisture is purged from the system by 15% of the process air. Dries with small negative pressure.

“Three Hole System” – One inlet and two outlets.

Note that the DH12XX dehumidifiers have a process air outlet flange.The DH8XX models do not.This allows dry air to be ducted into a space.

Power Supply – 220V supply 50Hz
Auto Reset – If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
All Metal Construction – All stainless steel metal inside & outside. Designed for longevity.
5m / 15′ Power Cord – No need to join cables when placed for instance in crawl spaces or lofts in the home for example.

The post DH1200 INOX DryFan 12 Litre Stainless Steel Desiccant Dehumidifier appeared first on Dehumidifiers Direct Ecor Pro.

]]>